Articles, illustrations, and video of asphalt and how it improves Virginia’s roadways.
By: Harikrishnan Nair, Ph.D., P.E., Kevin McGhee, P.E., Affan Habib, P.E., Michael Wells, P.E., Bipad Saha, P.E. | Copyright © 2018, Virginia Transportation Research Council. All rights reserved. All product and company names are trademarks of their respective owners.
In late 2011, the executive leadership of the Virginia Department of Transportation (VDOT) formed an Asphalt Quality Task Force to identify and recommend specific achievable measures to improve the quality of asphalt paving in Virginia. The task force recommended that VDOT assess the feasibility of making an incentive-only provision for ride quality the default for projects that do not qualify for VDOT’s regular specification for rideability, which includes both incentives and disincentives. A pilot application of the incentive-only provision was conducted during VDOT’s 2013 construction season. Although the results indicated no statistically reliable distinction in ride quality between the projects under the incentive-only provision and those with no rideability requirement, the number of sites, VDOT districts, contractors, etc., included in the assessment was limited.
The research summarized through this study addressed a concern that the criteria for the ride specification in the original (2013) incentive-only provision may have failed to reflect quality adequately beyond a limited 52.8 ft (0.01-mi) base length. The study documented the application of an incentive-only provision to a wider range of projects during VDOT’s 2015 construction season. The revised criteria addressed some of the concerns associated with the original criteria. The revised provision maintains the potential for incentives while reducing the likelihood for “accidental” bonuses when the final ride quality is marginal on average but highly variable. Overall, there remains little statistically reliable distinction between the achieved ride quality of projects under the incentive-only provision and of general resurfacing projects with no ride quality requirement. However, based on before and after determinations of the International Roughness Index, greater improvements in ride quality were achieved with the incentive-only pilots (at least in some cases) as compared to sites under no ride quality requirement. The revised incentive-only provision provides a mechanism through which a contractor has an opportunity to recover costs associated with improved practices and perhaps even earn incentives based on good ride quality. It does this while reducing the risk that VDOT will be subject to incentives for otherwise marginal quality work.
The study recommends that VDOT continue to promote and administer an incentive-only provision for qualifying resurfacing activities in accordance with the criteria recommended in this study. However, VDOT should continue to monitor the data from projects under the incentive-only provision and assess the effectiveness and benefit of the revised provision, provided in the Appendix, once it is applied on a larger basis.
By: Michael Fitch, Ph.D., and Benjamin F. Bowers, Ph.D., P.E. | Copyright © 2018, Virginia Transportation Research Council. All rights reserved. All product and company names are trademarks of their respective owners.
Recognizing the increasing emphasis on reducing stormwater runoff associated with transportation facilities and the changes in the Virginia Department of Environmental Quality’s Stormwater Management Program Permit Regulations, the Virginia Department of Transportation (VDOT) has taken the first step in examining ways in which permeable pavements can be used in place of conventional impervious pavement materials.
Like many departments of transportation, VDOT has minimal experience using permeable pavements of any type. As a consequence, many questions remain to be answered before VDOT can confidently use these types of pavements as stormwater best management practices in place of more commonly used stormwater control measures. The objective of this study was to develop a better understanding of how porous asphalt would perform when it is maintained using four different protocols: (1) no maintenance, (2) regenerative air vacuuming at 6-month intervals, (3) conventional vacuuming at 6-month intervals, and (4) regenerative air vacuuming at 12-month intervals. To meet these objectives, a Park & Ride facility operated by VDOT was paved with porous asphalt, maintained, and monitored for 4 years.
Although infiltration rates slowed substantially over the monitoring period, the lot continued to function as a stormwater best management practice (BMP) with an average infiltration rate approximately 12 times the required minimum of 10 in/hr. The different maintenance protocols tested did not have an effect on the rate of infiltration decline, indicating the reduction in permeability is likely not the result of sedimentation. It is estimated that the lot, constructed in 2013, will continue to function as an effective stormwater BMP until at least 2025 and will cost less than $1,500 per year to maintain.
Based on these findings, the study recommends that VDOT’s Location and Design Division continue to consider porous asphalt as a stormwater BMP option for Park & Ride facilities when deciding on the most cost-effective BMP based on site-specific conditions. Further, the study recommends that VDOT’s Materials Division oversee the formation of an advisory group to help determine in what settings porous asphalt can be used best by VDOT. This will help ensure that a comprehensive approach is taken when determining if porous asphalt could be used as a stormwater BMP in locations other than Park & Ride facilities.Read Full Report
Reprinted from Virginia Asphalt Magazine Fall 2017
By: Trenton M. Clark, P.E.
Over the life of a structure, maintenance and rehabilitation are required to maintain a minimum level of performance. Pavements are no different. Asphalt surfaces must be renewed to restore ride quality and reduce noise levels. Concrete surfaces require patching of the joints/cracks and grinding or overlay to restore the same functional attributes. In the early 2000’s, the exposed concrete pavement on I-64 in the Richmond District and Hampton Roads Districts was badly deteriorated and in need of restorative maintenance (see picture of York County JRCP). The concrete pavement joints had spalled and faulted; many of the joints had been replaced over the years and the concrete surface in the middle of the slabs had cracked and spalled.Read Full Article
Reprinted from Virginia Asphalt Magazine Fall 2016
By: Virginia Paving Company
Terminal Blvd. serves as the main roadway for inbound and outbound container trucks traveling to Norfolk International Terminals – one of the busiest ports on the east coast – as well as a route to Naval Station Norfolk. Over time, high truck traffic has led to the deterioration of the 9-inch thick continuously reinforced concrete pavement. Asphalt and concrete patches, as well as asphalt overlays, had been used in the past to repair areas of failing pavement and correct settlement, but overall, the roadway was still in poor condition.Read Full Article
The intersection of U.S. 40 and MD 213 topped the list of “trouble spots” for the Maryland State Highway Administration (SHA) network as early as 1993. The high daily traffic count and the large percentage of truck traffic resulted in excessive pavement deformation which needed to be addressed once or twice a year at a great expense. The Asphalt Industry was challenged to come up with a solution for the eastbound travel, passing and right-turn lanes of U.S. 40 at MD 213.Read Full Article
Copyright (c) 2013, The Virginian Pilot/PilotOnline.com. Posted with permission.
Written By: Dave Forester | Video By: Brian Clark
Tommy Nuttycombe started to avoid the Downtown Tunnel not because of traffic, but because of what lay beyond it.
The pavement on Interstate 264 in Norfolk was so full of craggy holes, bumps and rough edges that the retired brick salesman and Harley-Davidson rider didn’t trust it with his life.
“It got so bad, to tell you the truth, I was afraid of it,” he said.
Fear, hatred, disgust – the pavement on I-264 and nearby I-64 had for years inspired dark emotions among Hampton Roads motorists. But in recent weeks, a dreamy new coating of asphalt – the latest step in a year’s long process to rehabilitate the roads – has people turning downright affectionate.Read Full Article
Copywrite (c) 2013, Road & Bridges Magazine
By: Trenton M. Clark, P.E., David P. Shiells, P.E., and David A. White
Between 162,000 and 178,000 vehicles per day travel on I-66—far greater traffic levels than were expected when the road opened to traffic in 1963. A major pavement-rehabilitation project in 2011 and 2012 turned the stretch of road from a nightmare to a dream, with a smoother, quieter ride. Stone-matrix asphalt (SMA), a premium surfacing material for high-volume roadways, played a starring role in the transformation.Read Full Article